Table of Contents
Advertisement
Connection set-up
Select the desired external device from the list of paired external devices.
▶
▶
Select the desired profile from the list of available Bluetooth
®
If external Bluetooth
devices are already connected to Infotainment, then dur-
ing the Infotainment connection process, messages and options for the possi-
ble connection type (e.g. replacement of the connected external Bluetooth
device) are displayed.
Disconnection
Select the desired external device from the list of paired external devices.
▶
Select the desired profile from the list of available Bluetooth
▶
Delete the paired external device
▶
To delete, tap on one of the following function surfaces.
Delete all or All
- Delete all external devices
- Delete the desired external device
▶
Confirm the deletion by tapping on the function surface Delete.
Use the SIM card in the external module
Applies to Infotainment Columbus with the SIM card slot in the external mod-
ule.
Fig. 209 Insert SIM card in the external module
The SIM card inserted in the external module can be used for telephone and
data services.
The use of the SIM card requires the telephone function of the external mod-
ule to be switched on.
Switching on and off
›
In the Telephone main menu, tap on the function surface → "Business" tele-
®
profiles - .
phone "interface".
Insert SIM card
The SIM card slot is located in an external module in the glove box on the front
®
passenger side.
A SIM card size mini (standard size 25x15 mm) must be used.
›
Push the SIM card into the available slot with the cut-off edge to the left un-
til it "locks into place"
®
profiles - .
If a phone / phones was/were connected before inserting the SIM card with
the infotainment and telephone services on the SIM card are also selected,
then the connection is terminated to previously connected phones.
Use the SIM card for the first time
The first time you insert the SIM card in the external module, the following
menu appears.
›
Calls too - Data and telephone services are activated (the main menu phone is
displayed).
›
Data connections only - only the data services of the inserted SIM card are acti-
vated.
If you wish to change the activated services at a later time, go to the Tele-
phone main menu and tap on the → Use SIM card only for data connection func-
tion surface.
Enter the PIN code and save
›
If the SIM card is protected by a PIN code, then the PIN code of the SIM card
must be entered.
›
Confirm the entered PIN code.
›
or: If you would like to save the entered PIN code in the Infotainment memo-
ry, then press the function surface to save the PIN code and confirm it at
the same time.
Establish a data connection using the SIM-card
After selecting the services and entering the PIN code, if required, a data con-
nection menu is displayed.
›
Tap the function surface Connect.
If the network is not sufficiently set up, Infotainment prompts for network
settings.
» Fig.
209.
169
Telephone
Advertisement
Table of Contents
