Fig. 120 Replace bags
Read and observe
and
The waste container can be inserted into the slot in the door.
Insert waste container
›
Position the waste container at the front edge of the slot.
›
Push the waste container in the rear area in the direction of the arrow
» Fig.
119.
›
If required, push the waste container in the direction of arrow
Remove the waste container
›
Remove the waste container in the opposite direction to the arrow
» Fig.
119.
Open/close waste container
›
Lift the cover in the direction
C
Closing takes place in reverse order.
Replace bags
›
Remove the waste container from the slot.
›
Press the two locking lugs on the frame in the direction of arrow
» Fig.
120.
1
›
Pull the bag together with the frame downwards in the direction of arrow
.
2
›
Remove the bag from the frame.
›
Pull the new bag through the frame and pull it over the bag frame in the di-
rection of arrow
.
3
›
Insert the bag containing the frame in the direction of arrow
tainer body, so that the two lugs engage audibly with the frame.
100
Operation
on page 96 first.
B
» Fig.
119.
4
Note
We recommend that you use 20 x 30 cm bags.
Storage compartment underneath the front armrest
Fig. 121 Open storage compartment / interior of the compartment
Read and observe
A
›
To open the storage compartment, lift the armrest in the direction of arrow
.
until it stops
» Fig.
›
To close, fold the armrest down again against the direction of the arrow.
A
Interior of the compartment
Cup holder
A
Storage compartment for storing the cover of the 12-volt power outlet
B
Storage compartment for storing the vehicle key
C
Storage compartment for storing two coins and a card
D
Storage compartment
E
The part with the cup holder can be removed or rotated. By removing, the in-
terior of the storage compartment is increased, turning creates an additional
tray.
into the con-
and
on page 96 first.
121.
» Fig.
121;