Skoda KODIAQ Owner's Manual page 122

Hide thumbs Also See for KODIAQ:
Table of Contents

Advertisement

Intense air flow to the windscreen on / off (when switching on, the air
flow to the windows  and  is also switched on)
Switch the rear window heating on/off
Switching the windscreen heater on/off
Setting Climatronic in Infotainment (also operate with some functions)

Synchronize the temperature inside the entire vehicle according to the

temperature setting on the driver's side
Switch automatic mode on

Switch the cooling system on/off

When the function is switched on, an indicator lamp lights up inside or below
the button.
Setting temperature
The temperature can be set on the Climatronic control unit or in Infotain-
ment» page
120. In the range between 16 ° C to 29.5 ° C, an automatic tem-
perature control takes place.
At a temperature setting below 16 ° C,  lights up in the temperature display,
the Climatronic functions with maximum cooling performance.
At a temperature setting over 29.5 ° C,  lights up in the temperature display,
the Climatronic functions with maximum heating output.
Residual heat function 
After switching off the ignition, the engine residual heat is used for heat reten-
tion in the vehicle interior. The function can only be switched on with the igni-
tion off within 30 minutes after stopping the engine. The residual heat func-
tion turns off after about 30 minutes, or when the battery has a low charge
state.
CAUTION
Do not cover the interior temperature sensor
the Climatronic could be affected.
Note
In order to ensure adequate thermal comfort, there may be an increase in en-
gine idle speed during operation of the Climatronic in some circumstances.
The setting of the Climatronic is stored in the active user account personali-
sation
» page
59.
120
Operation
» page 81
» page 81
» page 121
» Fig. 165
- the function of
H
Operate Climatronic in Infotainment
Read and observe
on page 118 first.
To display the main menupress the button  on the Climatronic control
unit.
Function surfaces and screen display
Displays the current operation mode (or set the operation mode) of
A
the Climatronic
Set the desired temperature, front - left side
B
Set the desired temperature, front - right side
C
Setting the power in  operation
D
Switching on/off and adjusting the fan speed, cooling system, air dis-
E
tribution and air recirculation
Set the desired temperature (rear)
F
Colour representation of the air flow from the air vents at the front

(Blue colour - temperature reduction / red colour - temperature in-
crease)
Switching on/off the Climatronic

Switch the temperature synchronisation on/off throughout the entire

interior of the vehicle according to the temperature setting on the
driver's side
a)
 Locking/unlocking of the temperature setting and heating of the rear
seats using the rear buttons
  Switch Air Care function on/off
Set the auxiliary heater and ventilation
Switch the windscreen heating on/off
Fig. 167
Infotainment: example display of
the main Climatronic menu
» Fig. 167
a)
a)
a)

Advertisement

Table of Contents
loading

Table of Contents