Fig. 381 Changing light bulbs for fog lights
Read and observe
and
To replace the bulb for the fog lists, remove the cover of the front wheel arch.
Remove the cover
›
Set the front wheels so that the respective cover in the front wheel arch is
accessible
» Fig.
380.
›
Insert the clamp for removing the full wheel covers into the recess in the
cover.
›
Remove the cover by pulling the hook in the direction of arrow
Replacing the light bulb
›
Remove the protective cap
D
›
Turn the holder with the bulb in the direction of the arrow
stop
» Fig.
381.
›
Remove the holder with the bulb in the direction of arrow
›
Press the latches on the connector in the direction of arrow
›
Remove the key in the direction of the arrow
›
Attach the connector to the new holder with the light bulb.
›
Insert a new holder with the bulb in the headlamp and turn it in the direction
of arrow
as far as the stop.
2
Fit protective cap
» Fig. 375
on page 312.
D
Insert cover
›
Insert and push the cover into the corresponding opening
The cover must engage securely.
314
Do-it-yourself
on page 312 first.
» Fig. 375
on page 312.
as far as the
2
.
3
4
.
.
5
» Fig.
Removing/installing tail light
.
1
Fig. 382 Remove light / pull out connector
Read and observe
Removing
›
Open the boot lid.
›
Remove the respective grille
›
Unscrew bolt
›
Hold the light and carefully remove in the direction of arrow
›
Press the latch
›
Press the latch in the direction of arrow
rection of arrow
Fitting
›
Slide the plug into the light in the opposite direction of arrow
380.
›
Secure the latch
›
Insert the light with the openings
page 315 in the body and carefully press in the light
›
Screw in bolt
and
on page 312 first.
in direction of arrow
A
in the direction of arrow
.
B
2
on the holder in the direction of the arrow
C
and pull out the holder in the di-
5
.
6
in the opposite direction to arrow
A
onto the studs
E
in the opposite direction to arrow
B
» Fig.
382.
1
.
3
.
4
.
6
.
4
» Fig. 383
on
F
»
.
» Fig.
382.
2