Table of Contents
Advertisement
›
Insert the grille
in the associated opening in the lower area and press in
A
against the direction of arrow
CAUTION
When re-inserting the light, ensure that the wiring harness between the
■
body and the light is not jammed and the seal
rectly inserted - otherwise there is a risk of water ingress and damage to the
electrical installation.
Ensure that the vehicle paintwork and the tail lamp are not damaged when
■
removing and installing the lamp.
Replace bulb for indicator light in the rear light
Fig. 383 Replacing bulb / installing light
Read and observe
and
›
Turn the holder with the bulb in the direction of the arrow
stop
» Fig.
383.
›
Remove the holder with the bulb in the direction of arrow
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Insert a new bulb into the holder in the opposite direction to arrow
.
1
» Fig. 383
on page 315 is cor-
D
on page 312 first.
as far as the
7
.
8
›
Reinsert the holder with the new bulb into the lamp housing and turn in the
opposite direction to arrow
.
9
.
9
as far as the stop.
7
Fuses and light bulbs
315
Advertisement
Table of Contents
