Yamaha F150A Service Manual page 90

4. Turn the engine start switch to OFF. Initial
registration is
unlocked.
5. Push the lock button "1" of the transmit-
ter. Check that the buzzer of the receiver
will sound 1 short beep.
6. Turn the engine start switch to ON.
TIP:
If the outboard motor is equipped with the
6Y8 Multifunction Meter, "-" is displayed on
the tachometer when the engine start switch
is turned to ON.
7. Push the unlock button "1" of the trans-
mitter. Check that the buzzer of the
receiver will sound 2 short beeps.
TIP:
If the outboard motor is equipped with the
6Y8 Multifunction Meter, "0" is displayed on
the tachometer when the engine start switch
is turned to ON.
Y-COP (standard for European market and optional for Oceanian market)
complete. Y-COP
1
is
8. Turn the engine start switch to OFF.
3-21
1