Removing The Starter Motor; Installing The Starter Motor - Yamaha F150A Service Manual

Removing the starter motor

1. Remove the cap "1" and terminal "2", and
then disconnect the positive lead "3".
3
2. Remove the starter motor lead "1" from
the holder "2".
3. Disconnect the starter motor lead "1".
4. Remove the starter motor "1".

Installing the starter motor

1. Install the starter motor "1", and then
tighten the starter motor mounting bolts
"2" to the specified torque.
1
1
2
2
1
2
Starter motor mounting bolt "2":
30 N·m (3.0 kgf·m, 22.1 ft·lb)
1
2. Connect the starter motor lead "1", and
then tighten the starter motor lead bolt
"2" to the specified torque.
3. Install the cap "3".
4. Install the starter motor lead "1" to the
holder "4".
3
2
Starter motor lead bolt "2":
4 N·m (0.4 kgf·m, 3.0 ft·lb)
5. Install the positive lead "1" and terminal
"2", and then tighten the terminal nut "3"
to the specified torque.
6. Install the cap "4".
7-21
4
1
Starter motor
1
2
0
2
1
2
3
4
5
1
1
6
4
7
8
9
10
2
3
4
A