Logging - Yamaha F150A Service Manual

Logging

In version 2.00, it is possible to configure items to be logged, and logging intervals. Configure log-
ging, and disconnect the USB cable between the computer and the adapter to start logging.
Because the computer is not connected during logging, the adapter can be placed within the top
cowling (K-Line). This enables logging under conditions that are the same as those during normal
use. This makes it easier to reproduce trouble conditions, and to investigate the causes of any
faults.
TIP:
• Starts and stops logging by connecting and disconnecting the USB cable between the computer
and adapter.
• The adapter has a built-in battery. Therefore during operation, this is recharged using electricity
from the engine. When the engine stops, backup uses the internal battery.
• Guaranteed for 48 hours continuous operation with the battery charged for one hour. If the internal
battery becomes depleted, recorded data will be deleted.
• Recording normal (default condition) engine data (engine speed ranges) enables comparison with
fault data.
a
b
1. Adapter
a. Logging start
b. Engine start
c. Engine stop
d. Fault occurs.
1. Adapter
c
b
c
f
e. Logging stop
f. Adapter recording status
g. Recording (engine speed: 500 r/min or
more)
h. Stop recording (engine speed: less than
500 r/min)
2-11
YDIS
d
b
g
h
e
c