Yamaha F150A Service Manual page 115

14. Active test
While the engine is running and the shift is in the N position, operate the parts to check, and per-
form tests to check operating conditions and the engine condition.
Fully open ISC valve
16. Logger Graph
Displays in graph form engine operation data stored in the ECM for the last 13 minutes in 1 minute
intervals.
Engine speed
Battery voltage
18. Logging
While the computer and engine are not connected, record "Engine Monitor" data using the
adapter. Use "19. Record Set" to set items to record.
"20. Show Data" saves logged data in the computer, and displays this data in graph form. "21.
Clear Data" deletes data and conditions stored in the adapter.
27. Update
It is possible to update the database when update information is provided.
28. Setting
Switches the language to use in the YDIS (English, French, Spanish, Japanese).
29. Off Line
Displays graph data saved in the Engine Monitor (Graph Display) and Logging even when the
computer is not connected to the outboard motor.
31. Communication List
By connecting the YDIS to a hub via a CAN-Line, displays the name of Yamaha genuine parts
connected to the Digital Network (6Y8 Meter). This enables checking that connections are correct.
32. Bus Statistics
By connecting the YDIS to a hub via a CAN-Line, displays the bus load connected to the Digital
Network (6Y8 Meter). If the bus load is higher than 40 %, then check the connection status.
Fix ISC valve opening angle
TPS voltage
Engine temperature
4-4
Intake air pressure
Oil pressure
YDIS