Removing the throttle body
assembly
1. Disconnect the TPS coupler "a".
2. Remove the brackets "1".
3. Remove the throttle body assembly "1".
1
Checking the TPS
1. Check the TPS exterior. Replace if
cracked.
2. Check the electrical performance of the
TPS. See "Checking the TPS" (5-15).
Installing the throttle body assembly
1. Install the throttle link joint assembly "1".
a
1
1
6-26
1
2. Install new gaskets "1".
3. Install the throttle body assembly "2", and
then tighten the throttle body assembly
bolts "3" to the specified torque.
1
2
Throttle body assembly bolt "3":
13 N·m (1.3 kgf·m, 9.6 ft·lb)
4. Install the brackets "1".
5. Connect the TPS coupler "a".
Throttle body
3
3
3
1
1
0
1
2
3
4
5
6
7
8
9
10
A