Field Service Ver. 1.0 May 2008
7.3.38
IDC sensor board/Re, IDC sensor board/Fr (IDCSB/R, IDCSB/L)
1. Open the right door.
2. Remove the transfer belt.
See P.23
[1]
[1]
[4]
[1]
[2]
A00FF2C112DA
[2]
A00FF2C113DA
[3]
[1]
[2]
A00FF2C114DA
3. Remove two screws [1].
4. Unhook the spring [1] and remove
the cover [2].
NOTE
• Be careful not to lose the spring.
5. Disconnect the connector [1] each,
and remove two screws [2] each.
6. Remove the IDC sensor board/Re [3]
and IDC sensor board/Fr [4].
7. Other
97