Sd Card Slot Troubleshooting - Toshiba TECRA A8 series Maintenance Manual

2 Troubleshooting Procedures

2.15 SD card Slot Troubleshooting

This section describes how to determine if the computer's SD card functions are functioning
properly. Perform the steps below starting with Procedure 1 and continuing with the other
procedures as required.
Procedure 1
Insert a SD card into the slot. Check if the installed Windows recognizes automatically the
SD card and the data in the SD card can be read.
If the card is not recognized or data are not red, go to Procedure 2.
Procedure 2
The SD card is connected to IS2101 on the SD card board (FHBID*/FHBAD*).
Check 1
Check 2
Check 3
Check 3
2-70
Downloaded from www.Manualslib.com
Procedure 1: Check on Windows XP
Procedure 2: Connector Check and Replacement Check
Check on Windows XP
Connector Check and Replacement Check
The SD card, SD card board and system board may be disconnected. Make sure
the SD card is firmly inserted to IS2101 on the SD card board and the SD cable is
firmly connected to the connector CN9730 on the SD card board and the
connector CN9720 on the system board. If not, insert them firmly. If the SD card
is still not functioning properly, perform Check 2.
The SD card may be faulty. Replace it with a new one following the step in
Chapter 4 Replacement Procedures. If the problem continues, perform Check 3.
The SD card board may be faulty. Replace it with a new one following the step in
Chapter 4 Replacement Procedures. If the problem continues, perform Check 4.
The system board may be faulty. Replace it with a new one following the step in
Chapter 4 Replacement Procedures.
[CONFIDENTIAL]
manuals search engine

2.15 SD card Slot Troubleshooting

TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)