Sd Card Slot Troubleshooting; Procedure 1 Check On Windows Os; Procedure 2 Connector Check And Replacement Check - Toshiba PORTÉGÉ R700 Series Maintenance Manual

Troubleshooting Procedures

2.15 SD Card Slot Troubleshooting

This section describes how to determine if the computer's SD Card functions are functioning
properly. Perform the steps below starting with Procedure 1 and continuing with the other
procedures as required.
Procedure 1: Check on Windows OS
Procedure 2: Connector Check and Replacement Check

2.15.1 Procedure 1 Check on Windows OS

Insert a SD Card (SD memory card/Multimedia card) into the slot. Check if the installed
Windows recognizes automatically the SD Card and the data in the SD Card can be read.
If the card is not recognized or data are not red, go to Procedure 2.

2.15.2 Procedure 2 Connector Check and Replacement Check

The SD Card is connected to IS2130 on the SD/ODD board (FULSA*or FULSD*).
SD Card supports SD memory card/Multimedia card.
SD
SD
2-54
PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL]