Toshiba TECRA A8 series Maintenance Manual page 312

4 Replacement Procedures
Installing the Wireless LAN antenna/Bluetooth antenna
To install the wireless LAN antenna/Bluetooth antenna, follow the steps below and refer to
Figure 4-43.
1. Install the wireless LAN antennas and Bluetooth antenna to the display cover.
2. Arrange the wireless LAN antenna cables and Bluetooth antenna cable on the
display rear cover and secure it with the insulators and acetate tapes.
CAUTION: Arrange the wireless LAN antenna cables and Bluetooth antenna cable with
Wireless LAN antenna cable (white)
Insulator
*Stick the insulator to the display rear cover and
square cushion.
4-66
Downloaded from www.Manualslib.com
care of the followings:
(Upper right)
[CONFIDENTIAL]
manuals search engine
4.28 Wireless LAN antenna/Bluetooth antenna
Bluetooth antenna cable (brown)
*Arrange the outside of the boss.
Be careful not to overlap the wireless LAN
antenna cable and Bluetooth antenna cable.
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)