Toshiba TECRA A8 series Maintenance Manual page 305

4.25 LCD unit/FL inverter
8. Disconnect the LCD cable from the connector CN5000 on the system board. (When
9. Remove the following screws and LCD unit.
CAUTION: When lifting up the top of the LCD unit, hold the corners of the LCD unit.
M2×3C BIND
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
Downloaded from www.Manualslib.com
the cover assembly is removed first, the LCD cable is already disconnected.)
•
M2×3C BIND screw
The top edge of LCD unit is sensitive area.
LCD unit
Figure 4-39 Removing the LCD unit
manuals search engine
×4
Hook
CN5000
4 Replacement Procedures
M2×3C BIND
LCD cable
[CONFIDENTIAL] 4-59