Toshiba TECRA A8 series Maintenance Manual page 255

4.2 Battery pack
5. Separate the battery and battery cover while releasing hooks.
Installing the Battery pack
To install the battery pack, follow the steps below and refer to Figure 4-1 and 4-2.
CAUTION: The battery pack is a lithium ion battery, which can explode if not properly
NOTE: Check the battery's terminals visually. If they are dirty, wipe them clean with a
1. Turn off the power of the computer.
2. Disconnect the AC adapter and all other external devices to the computer.
3. Install the battery to the battery cover while engaging the hooks.
4. Insert the battery pack into the battery slot. Make sure the battery pack is installed
5. Slide the battery lock into the lock position.
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
Downloaded from www.Manualslib.com
Battery
Figure 4-2 Removing the battery
replaced, used, handled or disposed of. For environmental reasons, collect
the spent battery packs. Use only batteries recommended by Toshiba for
replacements.
dry cloth.
securely.
manuals search engine
4 Replacement Procedures
Battery cover
Hook
[CONFIDENTIAL] 4-9