Toshiba TECRA A8 series Maintenance Manual page 211

3.28 LAN/Modem/Bluetooth/IEEE1394 Test Program
Subtest03
This subtest checks the Bluetooth communication functions. Preparing the tester machine for
the Bluetooth test program. Insert a floppy disk containing the test program into the tester
machine and turn on the tester machine. The Bluetooth test menu will appear:
Press 3 to select the test and press Enter in the target machine. The following message will
appear:
When the test begins, the machine displays BD_ADDR of the DUT. The progress bar
stops when the test is completed. The following message is displayed.
-----------------------------------------------------------------------------
Bluetooth Subsystem T&D for PCSE(CS-Air) VerX.XX
-----------------------------------------------------------------------------
+----------------------+
|
+----------------------+
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
Downloaded from www.Manualslib.com
Table 3-6 Error code for Bluetooth test (BD_ADDR) (2/2)
Error code
0x20 Unsupported LMP Parameter Value.
0x21 Role Change Not Allowed.
0x22 LMP Response Timeout.
0x23 LMP Error Transaction Collision.
0x24 LMP PDU Not Allowed.
0x25 Not Exist
0x26 Not Exist
0x27 Not Exist
0x28 Not Exist
0x29 Not Exist
0x2a Not Exist
0x2b Not Exist
0x2c Not Exist
0x2d Not Exist
0x2e Not Exist
0x2f Not Exist
See the Specification of the Bluetooth System in detail.
Communication tests (DUT mode)
DUT | BD_ADDR of the DUT = XXXXXXXXXXXXX [h]
Ready>>>>>>>>>>>>>>>>>>>>>>
manuals search engine
Meaning
Copyright (C) by TOSHIBA Co.
<- Progress Bar
[ESC] : Stop
3 Tests and Diagnostics
[CONFIDENTIAL] 3-77