Toshiba TECRA A8 series Maintenance Manual page 286

4 Replacement Procedures
Installing the Bluetooth module
To install the Bluetooth module, follow the steps below and refer to Figure 4-24.
1. Connect the Bluetooth cable to the connector on the Bluetooth module.
2. Install the Bluetooth module to the slot until the hook latches.
3. Connect the Bluetooth antenna cable to the connector on the Bluetooth module.
4. Turn over the cover assembly and arrange the Bluetooth antenna cable and
Bluetooth cable in place.
4-40
Downloaded from www.Manualslib.com
[CONFIDENTIAL]
manuals search engine
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
4.15 Bluetooth module