Siemens S5-100U User Manual page 412

Simatic s5 programmable controller

Hide thumbs Also See for S5-100U:

Table of Contents

Function Modules

Installation

The diagnostic module is plugged into a bus unit like any other input or output module (see

section 3.2.1). The module has no mechanical coding. The coding element on the bus unit does

not have to be reset.

The module can be plugged in and removed regardless of the operating status of the

programmable controller.

No wiring is required. Existing wiring does not have to be removed.

There is no addressing since the module cannot be addressed by the programmable controller.

EWA 4NEB 812 6120-02

Chapters

Table of Contents