STEP 5 Operations
Conditional Block End "BEC"
The "BEC" operation causes a return within a block if the previous condition has been satisfied
(RLO = 1).
Otherwise, linear program scanning is continued with RLO "1".
Example:
Scanning of program block FB20 is terminated if the RLO = "1".
Program Sequence
PB7
JU FB20
8.1.9
Other Operations
Table 8-9 lists other basic operations. Explanations follow the table.
Operation
Operand
STP
NOP 0
NOP 1
BLD
ID
Note
These operations can be programmed in STL form only.
8-38
FB20
A
BEC
A I 0.0
BEC
Table 8-9. Other Operations
Stop at the end of program scanning (in OB1)
Current program scanning is terminated.
The PIQ is read out. Then the PLC goes into the STOP mode.
"No" Operation
Sixteen bits in the RAM are set to "0".
"No" Operation
Sixteen bits in the RAM are set to "1".
Display Generation Operation
"BLD" means a display generation operation for the programmer.
Parameter
130, 131, 132, 133, 255
STL
.
The "BEC" statement causes program
.
scanning to return to program block
.
PB7 from function block FB20 if input
.
I 0.0 is "1".
I
0.0
.
.
.
.
Meaning
S5-100U
Explanation
EWA 4NEB 812 6120-02