to an error. To change the number of error beeps, scan the bar code below and then
scan a digit (1-9) bar code from the
then Save. Default = 1.
Beeper Volume Max
Note: The Beeper Volume Max feature only applies to Granit products.
Scan the following bar code to set all error and good read beeps to the maximum
volume. This feature also sets the
Good Read Delay
This sets the minimum amount of time before the scanner can read another bar
code. Default = 0 ms (No Delay).
116
* No Delay
Medium Delay (1,000 ms)
Programming Chart,
Number of Error Beeps/LED Flashes
Beeper Pitch – Good Read
Beeper Volume Max
beginning on page 341,
to the highest level.
Short Delay (500 ms)
Long Delay (1,500 ms)
Xenon/Granit User Guide