About The Instant Charge Pack; Charge Information; Beeper And Led Sequences And Meaning - Honeywell Xenon 1900 User Manual

About the Instant Charge Pack

Power is supplied to the cordless scanner by a rechargeable instant charge pack
that is integrated in the scanner handle. The instant charge pack must be charged
before initial use. When the scanner is not in use, return it to the base. The model
CCB01-010BT-BF base is designed for use with the Honeywell model Xenon
1902g-BF scanner.

Charge Information

The instant charge pack is designed to charge while the scanner is positioned in
the cordless base unit. Refer to Base, page 86, for an interpretation of the Charge
Status indicators. Refer to
scanner without linking it to the base.
Place the scanner in the base that is connected to an appropriate power supply.
Use only a Listed Limited Power Source (LPS) or Class 2 type power supply with
output rated 5 to 5.2Vdc, 1A.
Caution: The Xenon 1902g-BF scanner can only be charged by CCB01-
Note: If you are powering the base through the interface cable (for example, a USB cable)
and not using an external power supply plugged into the aux port, the current
available for charging is reduced and charge times are increased. Charge times can
be improved by connecting the interface cable to a BC 1.2 compliant USB charge
port. Charging via the power supply is fastest.
The AC adapter should be plugged into the connector in the bottom of the base.
Using the interface cable power link is not recommended and will significantly
increase charge times.

Beeper and LED Sequences and Meaning

The scanner contains LEDs on the rear of the unit that indicate linking status,
decoding state, and instant charge pack condition. The base has LEDs on the top
of the unit that indicate its power up, communication, and instant charge pack
condition.
Xenon/Granit User Guide
Charge Only Mode
010BT-BF base. Use of any non-Honeywell power supply may
result in damage not covered by the warranty.
(page 93) if you need to charge a
83