Scanner Led Sequences And Meaning; Base/Access Point Led Sequences And Meaning - Honeywell Xenon 1900 User Manual

LED = error; green LED = success of any type. Scanners and the CCB01-010BT
base have audible indicators as well: 1 razz or error tone = error; 2 beeps = menu
change; 1 beep = all other successes.
The table below lists the indication and cause of the LED indication, beeps, and
vibrations for the scanner.

Scanner LED Sequences and Meaning

LED Indication
Normal
Operation
Red Flash
Green Flash
Red, blinking
Menu Operation
Green Flash
Red, blinking

Base/Access Point LED Sequences and Meaning

The base contains a red LED and the Access Point has a blue LED that indicate the
status of the unit and verifies its communication with the host system. The base
also has a green LED that indicates scanner battery charge condition.
Red or Blue LED - Host Communication
Red or Blue LED
Off
On continuously
Short blinks in multiple pulses. Occurs while transferring data to/
from the RF module or the Host port.
Green LED
Off
Slow flash, 1 second on, 1 second off
On continuously
Fast flash, 300 mSec on, 300 mSec off
Xenon/Granit User Guide
Beeper Vibrate
Indication Indication
None None
1 beep None
Razz or error tone None
2 beeps 2 vibrations
Razz or error tone 1 long vibration
Green LED - Scanner Battery
(base only, does not apply to Access Point)
Cause
Battery low
Successful communication or
linking
Failed communication
Successful menu change
Unsuccessful menu change
Communication Condition
USB suspend
Power on, system idle
Receiving data
Charge Condition
Battery not detected or charge
suspended
Pre-charge and charging
Charge complete
Charge Error
49