Chapter 5 - Input/Output Settings; Power Up Beeper - Honeywell Xenon 1900 User Manual

CHAPTER
5
INPUT/OUTPUT SETTINGS

Power Up Beeper

Note: This feature does not apply to the CCB02-100BT/CCB05-100BT base.
The scanner can be programmed to beep when it's powered up. If you are using a
cordless system, the base can also be programmed to beep when it is powered up.
Scan the Off bar code(s) if you don't want a power up beep. Default = Power Up
Beeper On - Scanner.
Power Up Beeper Off -
Power Up Beeper Off -
Xenon/Granit User Guide
Scanner
Cordless Base
* Power Up Beeper On -
Scanner
Power Up Beeper On -
Cordless Base
111