Passwords - Siemens SCALANCE XB-200 Web Based Management

Configuring with Web Based Management
5.4 The "System" menu
Note
Configuration data has a checksum. If you edit the files, you can no longer upload them to
the IE switch.
5.4.5.3

Passwords

There are files to which access is password protected. To load the file on the device, enter
the password specified for the file on the WBM page.
Description
The table has the following columns:
● Type
Shows the file type.
● Description
Shows the short description of the file type.
● Enabled
When selected, the password is used. Can only be enabled if the password is configured.
● Password
Enter the password for the file.
● Password Confirmation
Confirm the password.
● Status
Shows whether the current settings for the file match the device.
– valid
– invalid
– '-'
84
The "Enabled" check box is selected and the password matches the certificate.
The "Enabled" check box is selected but the password does not match the certificate
or no certificate has been loaded yet.
The password cannot be evaluated or is not yet being used. The "Enabled" check box
is not selected.
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02