Configuring with Web Based Management
5.5 The "Layer 2" menu
● P.t.P. Type
Select the required option from the drop-down list. The selection depends on the port that
is set.
– "-"
– P.t.P.
–
S hared Media
● P.t.P.
Enable or disable P.t.P.
Steps in configuration
1. In the input cells of the table row, enter the values of the port you are configuring.
2. From the drop-down lists of the cells of the table row, select the values of the port you are
configuring.
3. Click the "Set Values" button.
152
Point to point is calculated automatically. If the port is set to half duplex, a point-to-
point link is not assumed.
E ven with half duplex, a point-to-point link is assumed.
Even with a full duplex connection, a point-to-point link is not assumed.
Note
Point-to-point connection means a direct connection between two devices. A shared
media connection is, for example, a connection to a hub.
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02