Siemens SCALANCE XB-200 Web Based Management page 113

● OperState
Displays the current operational status. The operational status depends on the configured
"Status" and the "Link". The available options are as follows:
– Up
– Down
● Link
Shows the connection status to the network. With the connection status, the following is
possible:
– Up
– Down
● Mode
Shows the transfer parameters of the port.
● MTU (Maximum Transmission Unit)
Shows the packet size.
● Negotiation
Shows whether the automatic configuration is enabled or disabled.
● Flow Ctrl. Type
Shows whether flow control is enabled or disabled for the port.
● Flow Ctrl.
Shows whether flow control is working on this port.
● MAC Address
Shows the MAC address of the port.
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02
You have configured the status "enabled" for the port and the port has a valid
connection to the network.
You have configured the status "disabled" or "Link down" for the port or the port has
no connection.
The port has a valid link to the network, a link integrity signal is being received.
The link is down, for example because the connected device is turned off.
Configuring with Web Based Management
5.4 The "System" menu
113