Siemens SCALANCE XB-200 Web Based Management page 144

Configuring with Web Based Management
5.5 The "Layer 2" menu
Note
Standby master coupling with an optical 100 Mbps connection
While the coupling partner of a standby master with an optical 100 Mbps connection starts
up again, physically disconnect the connection between the standby master and its coupling
partner.
Description of the displayed boxes
● Standby
Click the check box to enable or disable the function.
● Standby Connection Name
This name defines the master/slave device pair. Both devices must be located in the
same ring.
Here, enter the name for the standby connection. This must be identical to the name
entered on the standby partner. You can select any name to suit your purposes, however,
you can only use the name for one pair of devices in the entire network.
144
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02