Siemens SCALANCE XB-200 Web Based Management page 180

Configuring with Web Based Management
5.6 The "Security" menu
Description of the displayed boxes
Table 1 has the following columns:
● 802.1x Auth. Control
Select the required setting.
If "No Change" is selected, the entry in table 2 remains unchanged.
● 802.1x Re-Authentication
Select the required setting.
If "No Change" is selected, the entry in table 2 remains unchanged.
● Copy to Table
If you click the button, the settings are adopted for all ports of table 2.
Table 2 has the following columns:
● Port
This column lists all the ports available on this device.
● 802.1x Auth. Control
Specify the authentication of the port:
– Force Unauthorized
– Force Authorized
– Auto
● 802.1x Re-Authentication
Enable this option if you want reauthentication of an already authenticated end device to
be repeated cyclically.
● 802.1x Auth. Status
Shows the status of the authentication of the port:
– Unauthorized
– Authorized
180
Data traffic via the port is blocked.
Data traffic via the port is allowed without any restrictions.
Default setting
End devices are authenticated on the port with the "802.1x" method.
The data traffic via the port is permitted or blocked depending on the authentication
result.
SCALANCE XB-200 Web Based Management
Configuration Manual, 04/2015, C79000-G8976-C360-02