Function Manifold Components, S-100 And S-105 Models (After Serial Number 136) - Genie S-100 Service And Repair Manual

March 2017
10-2
Function Manifold Components, S-100 and S-105 Models
(from serial number 137)
The function manifold is mounted to the turntable next to the ground controls.
Index
No. Description
1 Solenoid Valve Assembly,
3 position 4 way, DO3, 12V DC ......... FD ..........Boom up/down .............................................30-35 in-lbs / 3-4 Nm
2 Solenoid Valve, 3 position 4 way ....... FC ..........Turntable rotate control, left/right ..............25-27 ft-lbs / 34-37 Nm
3 Proportional Solenoid Valve ............... FG ..........Turntable rotate,
4 Solenoid Valve, 2 position 3 way ....... AA ..........Auxiliary drive/steer selector .....................25-27 ft-lbs / 34-37 Nm
5 Relief Valve, 3000 psi / 206.8 bar ...... AC ..........Platform manifold pressure limit ...............18-20 ft-lbs / 24-27 Nm
6 Flow Regulator Valve,
3 gpm / 11.36 L/min ........................... AD ..........Priority flow to platform .............................25-27 ft-lbs / 34-37 Nm
7 Check Valve, 5 psi / 0.34 bar ............. AE ..........Blocks flow from pump 2
8 Proportional Solenoid Valve, N.C....... FF ..........Primary lift, proportional
9 Check Valve, 10 psi / 0.69 bar ........... AB ..........Blocks flow from pump 1 and 2
10 Check Valve ....................................... AG ..........Blocks flow from auxiliary pump,
11 Check Valve, 5 psi / 0.34 bar ............. AF ..........Blocks flow from auxiliary pump,
This list continues on the next page.
Part No. 1268494
Schematic
Item Function
proportional speed control ................. 18-20 ft-lbs / 25-27 Nm
to auxiliary pump ............................ 12-14 ft-lbs / 16.3-19 Nm
valve speed control .............................33-37 ft-lbs / 45-50 Nm
to auxiliary pump ......................... 18-20 ft-lbs / 24.5-27.2 Nm
port 2A to pump 1 .............................. 33-37 ft-lbs / 45-50 Nm
ports 2A and 3A to pump 2 ................ 25-27 ft-lbs / 34-37 Nm
S-100 • S-105 • S-120 • S-125
Section 3 • Repair Procedures
MANIFOLDS
Torque
3 - 81