Setting The Wheel Circumference; Viewing The Lap Time - KTM 250 EXC EU Repair Manual

17 LIGHTING SYSTEM, INSTRUMENTS
17.4.6

Setting the wheel circumference

17.4.7

Viewing the lap time

Info
This function can only be opened if lap times have actually been timed.
Info
The seconds can only be set to zero.
If no button is actuated for 15–-20 seconds or there is no signal from the
wheel speed sensor, then the settings are automatically stored and the
Setup menu is closed.
Condition
The motorcycle is stationary.
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Activate the additional functions. (
Main work
–
Repeatedly press the button
display.
–
Press the button
–
When WS flashes, press the
Info
The wheel circumference is displayed in millimeters.
Enlarging the wheel circumference
400315-01
–
Press the button
Reducing the wheel circumference
–
Press the button
Condition
The motorcycle is stationary.
–
Repeatedly press the button
display.
–
Briefly press the button
LAP 1 appears on the left side of the display.
–
The laps 1–10 can be viewed with the button
–
Press and hold the button
–
Briefly press the button
Next display mode
400321-01
Info
When a signal from the wheel speed sensor arrives, the left side of the dis-
play changes back to the SPEED mode.
p. 119)
briefly until H appears at the bottom right of the
for 2–3 seconds.
button briefly.
.
.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
briefly until LAP appears at the bottom right of the
.
for 3–5 seconds to clear the lap times.
.
p. 89)
.
123