KTM 250 EXC EU Repair Manual page 54

6 FORK, TRIPLE CLAMP
–
Position the fork legs.
Info
The upper milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws
602737-10
–
Tighten screws
Guideline
Screw, bottom triple clamp
602738-10
–
Tighten screw
Guideline
Screw, top steering head
602739-10
–
Mount and tighten screw
Guideline
Screw, top steering stem
602740-10
–
Tighten screws
Guideline
Screw, top triple clamp
602741-10
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front brake caliper
–
Mount cable binder
–
Position the brake line, wiring harness and clamp. Mount and tighten screws
–
Install the front fender. (
–
Mount the handlebar cushion.
B00798-13
–
Refit the headlight mask with the headlight. (
–
Install the front wheel. (
toward the front.
5
.
6
.
4
.
7
M8
.
8
M8
.
bk
p. 89)
p. 93)
M8 15 Nm
(11.1 lbf ft)
M20x1.5 12 Nm (8.9 lbf ft)
17 Nm Loctite
(12.5 lbf ft)
M8 17 Nm
(12.5 lbf ft)
.
9
25 Nm Loctite
(18.4 lbf ft)
p. 90)
52
® 243™
® 243™
.
bl