250/300 Six Days; Speedometer Overview; Activation And Test; Setting Kilometers Or Miles - KTM 250 EXC EU Repair Manual

17 LIGHTING SYSTEM, INSTRUMENTS
17.4

250/300 SIX DAYS

17.4.1

Speedometer overview

17.4.2

Activation and test

17.4.3

Setting kilometers or miles

Info
If you change the unit, the value ODO is retained and converted accordingly.
The values TR1, TR2, A1, A2 and S1 are cleared when the unit of measure is changed.
Condition
The motorcycle is stationary.
–
Press the button
the display.
–
Press the button
LAP 1 appears on the left side of the display.
–
Laps 1-10 can be displayed by pressing the button
–
The button
–
Press the button
Next display mode
400321-01
Info
If an impulse is received from the wheel speed sensor, the left side of the
display changes back to the SPEED mode.
–
Press the button
–
Press the button
Info
When the vehicle is delivered, only the SPEED/H and SPEED/ODO display modes
are activated.
401761-01
Activating the speedometer
The speedometer is activated when one of the buttons is pressed or an impulse comes
from the wheel speed sensor.
Display test
To enable you to check that the display is functioning properly, all display segments
light up briefly.
400313-01
WS (wheel size)
After the display function check, the wheel size WS is displayed briefly.
Info
The number 2205 equals the circumference of the 21" front wheel with stan-
dard tires.
The display then changes to the last selected mode.
400314-01
Condition
The motorcycle is stationary.
briefly and repeatedly until LAP appears at the bottom right of
briefly.
has no function.
briefly.
to control different functions.
to control different functions.
121
.