17
LIGHTING SYSTEM, INSTRUMENTS
17.3.7
Setting the wheel circumference
17.3.8
Querying lap time
Info
This function can be called up only if lap times are measured.
Main work
–
Expose connector CZ
301287-10
–
Sever the black/brown cable
–
Insulate both cable ends.
301288-10
Finishing work
–
Refit the headlight mask with the headlight. (
–
Check the headlight setting. (
Condition
The motorcycle is stationary.
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Activate the additional functions. (
Main work
–
Press the button
display.
–
Press the button
The setup menu is displayed and the active functions shown.
–
Press the button
400315-01
–
Press the button
The wheel circumference is displayed in millimeters.
Enlarging the wheel circumference
–
Press the button
Reducing the wheel circumference
–
Press the button
–
Press the button
–
Press the button
The settings are stored and the setup menu is closed.
400314-01
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
.
1
.
2
p. 117)
p. 119)
briefly and repeatedly until H appears at the bottom right of the
for 3 - 5 seconds.
until the WS indicator blinks.
.
.
.
briefly.
for 3 - 5 seconds.
p. 90)
p. 89)
120