KTM 250 EXC EU Repair Manual page 82

9 SHOCK ABSORBER, SWINGARM
–
Position the new heim joint.
–
Mount special tool
Mounting tool, heim joint (50329000044) (
–
Press in the heim joint by screwing in the screw.
303612-10
–
Press in shaft seal rings
Info
The heim joint for the shock absorber at the swing arm is Teflon coated. It
must not be greased with grease or with other lubricants. Lubricants dis-
solve the Teflon coating, thereby drastically reducing the service life.
303610-10
–
Mount spacers
303609-10
–
Position the shock absorber.
–
Mount and tighten screw
Guideline
Screw, bottom shock
absorber
Info
Raise the wheel slightly to make it easier to mount the screw.
303608-10
Finishing work
–
Remove the motorcycle from the lift stand. (
.
4
on both sides with the open side facing inward.
3
on both sides.
2
.
1
M12
p. 272)
80 Nm Loctite ® 2701™
(59 lbf ft)
p. 10)
80