Omron F3SJ-A series User Manual page 140

Appendix
Protect bar (2 sets, common for emitter/receiver)
Appearance
Protection bracket for protect bar (4)
Appearance
Environment-resistant case
Appearance
Back-mounting bracket for environment-resistant case
Appearance
F3SJ-A
122
User's Manual
Model name
F39-PJ Two protect bars are provided in a set (common for
emitter/receiver). For side mounting of F3SJ with a width
of 1001mm or wider, you must purchase protection
bracket (4) for protect bar (F39-PJ-MS).
Model name
F39-PJ-MS Intermediate mounting bracket for side mounting using a
protect bar. You need to purchase 1 for an F3SJ with a
protected height of 1001 to 2000mm and 2 for an F3SJ
with a protected height of 2009 to 2500mm.
Model name
For emitter F39-EJ -L
For receiver F39-EJ -D
Model name
F39-EJ-R 2 brackets per set
Note
Note
Note
One environment-resistant case is provided in a
set.
Mounting bracket is not included.
You must purchase optional back-mounting
bracket (F39-EJ-R) or side-mounting bracket
(F39-EJ-S).
When environment-resistant case is used,
operating range is from 0.2 to 7m (protective
height of 1649mm or less) and from 0.2 to 5m
(protective height of 1655mm or more).
If protective height of F3SJ is 600mm or more,
only vertical mounting as shown left is available.
A protective structure complies to
IP67(IEC60529).
Note