Appendix
Control unit
Appearance
Control unit
Appearance
Branch connector for safety light curtains
Appearance
Cable with connectors on both ends for use with branch connector
Appearance
F3SJ-A
120
User's Manual
Model name
Output
Relay, 3a+1b contact - F39-JC B cable with connectors on both
F3SP-B1P
Model name
Output
F3SX-N-
Relay, 2a+1b contact
(expandable)
F3SX-E-
Solid-state output
(DC solid-state
safety output X 2,
Auxiliary output X
3)
Model name
F39-CN5
Wire-saving connector for connection with F3SX
Use in combination with F39-JC
Cable
Model name
length
F39-JC1T
1m
F39-JC3T
3m
F39-JC5T
5m
F39-JC7T
7m
F39-JC10T
10m
F39-JC15T
15m
Note
ends is required.
- F3SJ with PNP output can be connected.
- Cannot be used as a muting system.
Note
- Connector connection is possible by using
an F39-JC B cable with connectors on both
ends and an F39-JC T branch connector
for safety light curtains. Connection is
possible only with an F39-JC A cable with
connector on one end.
- A door switch, two-hand control switch,
single beam, or relay unit can be added to
the F3SX.
- F3SJ with PNP output can be connected.
- Can be used as a muting system if an F39-
JC A cable with connectors at both ends is
used.
- Various settings can be changed and input/
output terminals can be monitored using the
setting support software for F3SX.
Note
T.
Note
Wire-saving cable for connection with F3SX
Use in combination with F39-CN5.