Model Designation - Mitsubishi Electric MR-J4 Instruction Manual

1. FUNCTIONS AND CONFIGURATION

1.6 Model designation

(1) Rating plate
The following shows an example of rating plate for explanation of each item.
MODEL
POWER :100W
INPUT
OUTPUT: 3PH170V 0-360Hz 1.1A
STD.: IEC/EN 61800-5-1
Max. Surrounding Air Temp.: 55°C
IP20
KCC-REI-MEK-TC300A624G51
TOKYO 100-8310, JAPAN
(2) Model
The following describes what each block of a model name indicates. Not all combinations of the symbols
are available.
Symbol Rated output [kW]
100
200
350
500
700
11K
15K
22K
AC SERVO
SER.A45001001
MR-J4-10B
: 3AC/AC200-240V 0.9A/1.5A 50/60Hz
MAN.: IB(NA)0300175
DATE:2014-05
MADE IN JAPAN
Series
Rated output
10 0.1
20 0.2
40 0.4
60 0.6
70 0.75
1
2
3.5
5
7
11
15
22
Serial number
Model
Capacity
Applicable power supply
Rated output current
Standard, Manual number
Ambient temperature
IP rating
KC certification number, The year and month of manufacture
Country of origin
Special specifications
Symbol
None
Fully closed loop control four-wire type/
-RJ
load-side encoder A/B/Z-phase input compatible/
Compatible with MR-D30 functional safety unit
-ED MR-J4-_B_ without a dynamic brake (Note 2)
-RU MR-J4-_B_-RJ without a dynamic brake (Note 2)
-PX MR-J4-_B_ without regenerative resistor (Note 1)
-RZ MR-J4-_B_-RJ without regenerative resistor (Note 1)
Note1. Indicates a servo amplifier of 11 kW to 22 kW that
does not use a regenerative resistor as standard
accessory. Refer to Appendix 11.2 for details.
2. Dynamic brake which is built in 7 kw or smaller servo
amplifiers is removed. Refer to Appendix 11.1 for details.
Power supply
Symbol Power supply
3-phase or 1-phase
None
200 V AC to 240 V AC
1-phase 100 V AC to 120 V AC
1
3-phase 380 V AC to 480 V AC
4
SSCNETIII/H interface
1 - 23
Special specifications
Standard