Dr 19 External Speed - Siemens SIWAREX WP241 Manual

8.19

DR 19 External speed

If the SIWAREX module is not to determine the belt speed because the current speed is
available externally, e.g. in a controller, it can be passed on to the SIWAREX via DR 19. The
current material flow rate can then be calculated.
Procedure
● Enter a value in data record DR 19
● Transfer the data record to the scale
Table 8- 17 Assignment of data record 19
Variable Note
Data record Contains no. of data record
number
Length Data record length information
Application Information about which application the
data record belongs to
Version identifier Information about current data record
version
External speed The externally determined speed can be
value sent to the scale.
Reserve 1 Reserve
Reserve 2 Reserve
SIWAREX WP241
Manual, 04/2014, A5E33713528A
Scale parameters and functions of the belt scale
Type L Rw Default Min.
USHORT 2 r 19
USHORT 2 r 16
USHORT 2 r 104
USHORT 2 r 1
FLOAT 4 rw 0
SHORT 2 rw 0
USHORT 2 rw 0
8.19 DR 19 External speed
Max. Register
- - 1602
- - 1603
- - 1604
1 65635 1605
- - 1606
0 - 1608
0 - 1609
119