Siemens SIWAREX WP241 Manual page 71

Variable
Resolution of weight
and belt load
(Page 74)
Resolution of flow rate
(Page 74)
Resolution of master
totalizer (Page 75)
Design flow rate
(Page 75)
Weigh length
(Page 75)
Belt length (Page 75)
Number of belt
revolutions (Page 76)
Speed detection
(Page 76)
Design speed
(Page 76)
Speed correction if belt
loaded (Page 76)
Belt load factor for
speed correction
(Page 76)
Impulse constant
speed sensor
(Page 77)
Reserve
Initial zero calibration
digits (Page 77)
Calibration weight
(Page 77)
Calibration load
(Page 77)
Calibration quantity
(Page 78)
Span calibration digits
(Page 78)
SIWAREX WP241
Manual, 04/2014, A5E33713528A
Note
Resolution (1*10**k, 2*10**k,
5*10**k]; k: -3 ... 2 )
Resolution (1*10**k, 2*10**k,
5*10**k]; k: -3 ... 2 )
Resolution (1*10**k, 2*10**k,
5*10**k]; k: -3 ... 2 )
Customer input according to rated
data
Is measured and entered by the
user.
Number of belt revolutions relevant
to measurement,
specification applies to calibration
and zero setting commands
0: No sensor, speed is specified or
determined.
1: One sensor
2: External specification of speed
via DR19
Maximum speed with empty belt
Only relevant if no sensor present.
Percentage deviation in speed
when belt is loaded (see next
parameter)
Belt load in % of nominal load.
Only relevant if no sensor is
present
(specified value or imported from
DR4)
Only relevant if a sensor present
Calibration digits with empty belt
Specification in KG or LB
(depending on selected unit for belt
load)
Value input, e.g. 35 kg/m for
calibration by test chain
Value input in KG or LB (depending
on selected unit for belt load)
ADC digits for test weight
Value input or imported from DR4
Scale parameters and functions of the belt scale
Type L Rw Default
FLOAT 4 rw 0.01
FLOAT 4 rw 0.1
FLOAT 4 rw 0.1
FLOAT 4 rw 360
FLOAT 4 rw 1
FLOAT 4 rw 30
USHORT 2 rw 1
USHORT 2 rw 1
FLOAT 4 Rw 1
FLOAT 4 rw 0.98
FLOAT 4 rw 100
FLOAT 4 rw 1000.0
LONG 4 rw 0
LONG 4 rw 500000
FLOAT 4 rw 50
FLOAT 4 rw 0
FLOAT 4 rw 0
LONG 4 rw 1000000
8.3 DR 3 Belt scale parameters
Min. Max.
- -
Register
1014
1016
1018
1020
1022
1024
1026
1027
1028
1030
1032
1034
1036
1038
1040
1042
1044
1046
71