Perform Axle Maintenance - Ansi Models; Perform Hydraulic Oil Analysis - Genie TMZ-50/30 Service Manual

Section 3 • Scheduled Maintenance Procedures
800-610-4101
ActionRental.com
CHECKLIST B PROCEDURES
B-13
Perform Axle Maintenance -
ANSI Models
Axle specifications require that this
procedure be performed quarterly
or every 3000 miles, whichever
comes first.
Proper axle maintenance, as specified in the axle
manufacturer's maintenance schedule, is essential
to good axle performance and service life. Failure
to perform the maintenance procedures can lead to
poor axle performance and component damage.
Required maintenance procedures and additional
axle information is available in the Dexter Axle
Operation Maintenance Service Manual
(Dexter part number LIT-001-00).
Dexter Axle Operation Maintenance Service Manual
Genie part number
3 - 22
B-14

Perform Hydraulic Oil Analysis

Replacement or testing of the hydraulic oil is
essential for good machine performance and
service life. Dirty oil and suction strainers may
cause the machine to perform poorly and
continued use may cause component damage.
Extremely dirty conditions may require oil changes
to be performed more often.
84376
TMZ-50/30
June 2005
Before replacing the hydraulic oil,
the oil may be tested by an oil
distributor for specific levels of
contamination to verify that
changing the oil is necessary. If
the hydraulic oil is not replaced
at the two year inspection, test
the oil quarterly. Replace the oil
when it fails the test. See E-1,
Test or Replace the Hydraulic Oil.
Part No. 65162
REV B