JUKI LBH-1790 Instruction Manual page 95

Error
code
E
E
E
E
E0
E0
E0
E
Description of error
Presser size error (Width direction : left only)
When stitching data exceeds the size of left only of
width direction of presser.
Presser size error (Length direction : front)
When stitching data exceeds the size of front of
length direction of presser.
Presser size error (Width direction : right and left)
When stitching data exceeds the size of both right and
left of width direction of presser.
Presser size error (Length direction : rear)
When stitching data exceeds the size of rear of length
direction of presser.
Panel is connected to the machine other than
supposed. (Machine type error)
When machine type code of system is improper in
case of initial communication.
Nonagreement of system version
When version of system software is improper in case
of initial communication.
Main shaft motor encoder defectiveness or phase-out
When encoder of sewing machine motor is abnormal.
Main motor hole sensor defectiveness or position
sensor defectiveness
When hole sensor or position sensor of sewing
machine is defective.
–  –
How to Place of
recover recovery
Possible to Sewing data
re-start after input screen
reset.
Possible to Sewing data
re-start after input screen
reset.
Possible to Sewing data
re-start after input screen
reset.
Possible to Sewing data
re-start after input screen
reset.
Possible Communication
to rewrite screen
program after
pressing down
communication
switch.
Possible Communication
to rewrite screen
program after
pressing down
communication
switch.
Turn OFF the
power.
Turn OFF the
power.