JUKI LBH-1790 Instruction Manual page 91

Error
code
E0
E0
E0
E0
E0
E0
E0
E0
Description of error
EEP-ROM capacity over
Capacity of EEP-ROM is short.
Type of EEP-ROM is different.
When the mounted EEP-ROM is different in type.
File size over
File is too large.
File No. error
Designated file is not in server or Media.
Detection of step-out of presser lifting motor
When step-out of motor is detected at the time when
presser lifting motor passes origin sensor or starts
operation.
Pattern data size over
When sewing cannot be performed since total size of
continuous stitching data or size of downloaded data is
too large.
Detection of step-out of needle thread trimmer motor
When step-out of motor is detected at the time when
needle thread trimmer motor passes origin sensor or
starts operation.
Detection of step-out of bobbin thread trimmer motor
When step-out of motor is detected at the time when
bobbin thread trimmer motor passes origin sensor or
starts operation.
– 0 –
How to Place of
recover recovery
Possible to Previous
re-start after screen
reset.
Possible to Previous
re-start after screen
reset.
Possible to Previous
re-start after screen
reset.
Possible to Previous
re-start after screen
reset.
Possible to Data input
re-start after screen
reset.
Possible to Data input
screen
re-start after
reset.
Possible to Data input
screen
re-start after
reset.
Possible to Data input
re-start after screen
reset.