JUKI LBH-1790 Instruction Manual page 62

Button and display
A CONTINUOUS STITCHING DATA
NAME display
B KNIFE CANCEL button
C PRESSER DOWN button
D BOBBIN WINER button
E CONTINUOUS STITCHING
PATTERN NO. display
F WITH/WITHOUT DOUBLE
STITCHING display
G NUMBER OF TIMES OF BASTING
display
H STEP STITCHING button
I NEEDLE THREAD TENSION
CHANGE button display
J NUMBER OF TOTAL STITCHES
display
K1 COUNTER VALUE CHANGE button
K2 COUNTER CHANGE OVER button
L OVEREDGING WIDTH, LEFT button
M KNIFE GROOVE WIDTH, LEFT
display
N SEWING SHAPE display
Name inputted to continuous stitching data during sewing is displayed.
Every time the button is pressed, dropping/non-dropping knife is
changed over alternately.
Presser can be lowered and the knife down screen is displayed.
To raise the presser, press the presser up button displayed in the
presser down screen.
＊ When performing threading in this state, turn OFF the power before
performing.
Bobbin thread can be wound.
11. WINDING BOBBIN THREAD,
→ Refer to
Continuous stitching data No. during sewing is displayed.
With/without double stitching which is set to the pattern data during
sewing is displayed.
Number of times of basting which is set to the pattern data during
sewing is displayed.
When the button is pressed, the step stitching screen to check the
needle entry point and to perform re-sewing is displayed.
10. PERFORMING RE-SEWING,
→ Refer to
Needle thread tension which is set to the pattern data during sewing is
displayed.
Number of total stitches of the continuous stitching data during sewing
is displayed.
Existing counter value is displayed on this button. When the button is
pressed, the counter value change screen is displayed.
12. USING COUNTER, p.
→ Refer to
Display of sewing counter/No. of pcs. counter can be changed over.
12. USING COUNTER, p.
→ Refer to
Overedging width, left which is set to the pattern data during sewing is
displayed.
Knife groove width, left which is set to the pattern data during sewing
is displayed.
Sewing shape during sewing is displayed.
– 61 –
Description
p.29.
p.27.
30.
30.