JUKI LBH-1790 Instruction Manual page 43

No.
Flow bar-tacking offset, left
This item sets length to form bar-tacking
section of flow bar-tacking shape.
Flow bar-tacking offset, right
This item sets length to form bar-tacking
section of flow bar-tacking shape.
Eyelet shape length
This item sets upper side length from center of
eyelet of eyelet shape.
Number of stitches of eyelet shape
This item sets number of stitches in the upper
90 of eyelet shape.
Eyelet width
This item sets crosswise size of the inside of
eyelet shape.
Actual needle entry point is the dimension to
which S0 Knife groove width, left is added.
Eyelet length
This item sets lengthwise size of the inside of
eyelet shape.
Round type shape length
This item sets upper side length from the
center of round type shape.
Round Radial, top
type, top
Round Radial,
type, bottom
bottom
Number of stitches of radial shape
This item sets number of stitches in the upper
0° of radial shape.
Item
Semilunar,
top
Semilunar,
bottom
–  –
Setting range Edit unit
0.00 to .00 0.0mm
0.00 to .00 0.0mm
.0 to 0.0 
 to  0.mm
.0 to 0.0 0.mm
.0 to 0.0 0.mm
.0 to .0 0.mm
 to  
Remarks
※1
※1
※1
※1
※1
※1
※1
※1