JUKI LBH-1790 Instruction Manual page 82

Item
Presser size length (Type 5)
When type  of U Kind of presser is
set, input the length of the presser.
Sewing start position (Feed direction)
Sewing start position in terms of presser
is set. Set this item when starting position
is desired to be shifted due to overlapped
section or the like.
Cloth cutting knife size
Input knife size used.
Function of plural motions of cloth cutting knife
Ineffective/effective
: Ineffective
Function of thread breakage detection Ineffective/
effective
: Ineffective
Selection of presser position at the time of ON of
READY key (Up/Down)
Presser foot position when READY key is pressed is
set.
: Presser up
Selection of presser position at the time of
completion of 1-cycle (Up/Down)
Presser foot position when -cycle is completed is set.
: Presser up
Needle thread trimming release motion
start distance
Distance from start of sewing to start of
trimmer release motion of needle thread
trimmer motor is inputted.
Setting range
0.0 to 0.0
. to 0.0
.0 to .0
---
: Effective
---
: Effective
---
: Presser
down
---
: Presser
down
0 to .0
–  –
Edit unit Initial display
0.mm 0.0mm
0.mm .mm
0.mm .0mm
--- Ineffective
--- Effective
--- Presser UP
--- Presser UP
0.mm .0mm