JUKI LBH-1790 Instruction Manual page 44

No.
Reinforcement of radial shape
This item sets with / without reinforcement
of radial shape.
stitching
Pitch at bar-tacking section
This item sets sewing pitch of bar-tacking
section.
Square Round
type, top type,
top
Square Round
type, type,
bottom bottom
1st clearance
This item sets the clearance between st
bar-tacking and knife groove. This item is
applied to all shapes.
2nd clearance
This item sets the clearance between nd
bar-tacking and knife groove. This item is
applied to all shapes.
Single/double stitching
This item selects single or double stitching.
: Single stitching
Item
: With
Semilunar,
top
Semilunar, Straight
bottom bar-tack,
bottom
: Double stitching
–  –
Setting range
---
: Without
0.00 to
.00
Flow,
bottom
0.0 to .0
0.0 to .0
---
Edit unit Remarks
--- ※1, ※2
0.0mm ---
0.mm ---
0.mm ---
--- ---