JUKI LBH-1790 Instruction Manual page 14

Button and display
A NUMBER OF TIMES OF BASTING
display
B PATTERN NAME display
C WITH/WITHOUT DOUBLE
STITCHING display
D KNIFE CANCEL button
E PRESSRER DOWN button
F BOBBIN WINDER button
G PATTERN NO. display
H STEP STITCHING button
I NEEDLE THREAD TENSION button
J NUMBER OF TOTAL STITCHES
display
K OVEREDGING WIDTH, LEFT display Overedging width, left which is set to the pattern during sewing is
L1 COUNTER VALUE CHANGE button
L2 COUNTER CHANGE OVER button
Number of times of basting which is set to the pattern data during
sewing is displayed.
Pattern name which is set to the pattern data during sewing is
displayed.
With/without double stitching which is set to the pattern data during
sewing is displayed.
Every time this button is pressed, dropping of knife and non-dropping
of knife can be changed over alternately.
Presser can be lowered and the knife down screen is displayed.
To raise the presser, press the presser up button displayed in the
presser down screen.
＊ When performing threading in this state, turn OFF the power before
performing.
Bobbin thread can be wound.
11. WINDING BOBBIN THREAD,
→ Refer to
Pattern No. during sewing is displayed.
When this button is pressed, the screen of step stitching to check
needle entry point and to perform re-sewing is displayed.
10. PERFORMING RE-SEWING,
→ Refer to
Needle thread tension which is set to the pattern data during sewing is
displayed, and when this button is pressed, the needle thread tension
change screen is displayed.
9. CHANGING NEEDLE THREAD TENSION,
→ Refer to
Number of total stitches of the pattern data during sewing is displayed.
displayed.
Existing counter value is displayed on this button. When the button is
pressed, the counter value change screen is displayed.
→ Refer to 12. USING COUNTER, p.
Display of sewing counter/No. of pcs. counter can be changed over.
12. USING COUNTER, p.
→ Refer to
– 13 –
Description
p.29.
p.27.
30.
30.
p.25.