JUKI LBH-1790 Instruction Manual page 102

3) Performing format
In case of re-formating the Media, be sure to perform it with IP-0. The Media formated
with the personal computer cannot be read with IP-0.
1 Display the media format screen.
When switch is held pressed for three
seconds, media format button
on the screen. When this button is pressed, the
media format screen is displayed.
1 Start formating of the Media.
Set the media you desire to format to the media
slot, close the cover, press ENTER button
(B) and formating starts.
Save necessary data in the media to the other
vehicle before formating. When formating is
performed, the inside data are deleted.
(A) is displayed
A
– 0 –
B