JUKI LBH-1790 Instruction Manual page 69

Button and display
A CYCLE DATA NEW REGISTER
button
B CYCLE DATA COPY button
C CYCLE DATA NAME INPUT button
D CYCLE DATA NAME display
E PRESSER DOWN button
F BOBBIN WINDER
G CYCLE DATA NO. SELECTION
button
H CURSOR display
I SEWING PRODUCT display
J SEWING PRODUCT SELECTION
button
K SEWING DATA CHANGE button
L PATTERN SELECTION button
M SEWING ORDER display
N ARROW MARK button
O PATTERN SEPARATE DELETE
button
P PATTERN ALL DELETE button
Cycle data No. new register screen is displayed.
Cycle pattern No. copy screen is displayed.
Cycle data name input screen is displayed.
7. NAMING THE PATTERN,
→ Refer to
Name inputted in cycle data which is being selected is displayed.
Presser down screen is displayed and the needle moves to the right
side. To raise the presser, press the presser up button displayd in the
presser down screen.
＊ When performing threading in this state, turn OFF the power before
performing.
Bobbin thread can be wound.
11. WINDING BOBBIN THREAD,
→ Refer to
Cycle data No. which is being selected is displayed in the button.
When the button is pressed, cycle data No. change screen is
displayed.
Cursor can move on sewing product with ARROW MARK button (N)
and can designate the position on sewing product to input pattern data.
Image of sewing product is displayed.
Image of sewing product (I) selection screen is displayed.
Sewing data of pattern data inputted in the position of cursor change
screen is displayed.
When the button is pressed, pattern No. change screen is displayed.
In addition, pattern No. can be inputted in the position of cursor.
Sewing order of inputted pattern data is displayed.
When the screen is changed over to the sewing screen, pattern to be
sewn first is displayed in blue color.
Position of cursor (H) can be moved.
Release of input of pattern data registered in the position of cursor can
be performed.
Release of input of all pattern data inputted in cycle data which is being
selected can be performed.
– 68 –
Description
p.22.
p.29.